So, three lil rough spots in the living room, dining room, kitchen, and hallway re-flooring project. Just conquered one of ’em–a transition from the living room to the dining room. I had attempted to match up a couple of partial pieces to link up well with the flooring coming down the hallway, and though they seemed to fit nicely, glued to the laminate planks coming out of the living room, once the hallway pieces moved into the dining room, a wee crack opened up due to a less than 1/32-inch difference in floor height. I tried ameliorating that and ended up exacerbating the problem to slightly over 1/32-inch, so backed off that.
Filled it and stained the fill. Hoped for the best, but was never satisfied. When my Wonder Woman asked if there were a transition piece I could put in that was similar to what I used transitioning between the laminate and some tiling in the kitchen, but with a lower profile, I was stumped. . . until I began digging around in a storage area under the laundry room where I had various pieces of scrap molding and found a 3/4-inch wide, very low profile piece of oak molding. “Hmmm,, I bethought meself, “if I stained this juuust right. . .”
And yeh, some nice, dark walnut stain, nicely wiped to yield a lighter walnut appearance then “varnished” with a satin polyurethane, applied to the eensy-weensy crack with a (transparent and stainable when dried) “30-year” caulk/sealer, and my, that looks nice!
On to the other minor “Oopsies,” now, then baseboards and other trim (particularly doors) changed out, new paint all around (yes, I do have drop cloths and painter’s tape, TYVM ? ), and a few other detail touches (NOW can I install the crown molding? Hmmm? *heh*), and this part of our live-in renos will be finished. Mostly. . . ‘cos the bedrooms haven’t been “re-floored” yet (though that will entail mostly just cleanup after removing the carpeting, since the oak flooring underneath it–as much as I have been able to see so far, at least–seems to be in excellent condition).
Having some real fun, now. ?